KLIMASAN climate ceiling:
Maximum flexibility for your building: our climate ceiling can be integrated into almost any ceiling construction without complex advance planning.
Whether it's a new or old building, a concrete ceiling, wooden beam ceiling, sloping roof or knee wall – it always works! Whether you want to maintain the room height or use the ceiling cavity, we offer you a tailor-made solution that perfectly suits your needs. And all this with drastically reduced investment and operating costs.
The system consists of a lightweight steel or aluminium structure combined with a small-diameter oxygen-tight system pipe. The minimum installation height (room height reduction) is approx. 30 mm and can be mounted on almost any ceiling. The KLIMASAN system is planked with standard clay building boards, gypsum fibre boards or plasterboard as standard.
This drywall system can be installed under any raw ceiling and adapts to any floor plan with minimal planning effort. It is equally suitable for new builds and renovations and can be suspended or mounted directly – with an installation height of just three centimetres. In short, it offers maximum flexibility and thus enables high occupancy density in every room. This, in turn, is the key to high performance and efficiency.
Heating & Cooling with one System
Due to its location in the room and its surface area, the ceiling offers ideal conditions for surface heating based on the principle of heat radiation. The impact on the room geometry is minimal compared to any other surface in the room. A particular advantage of the ceiling is that it can also be used optimally for cooling the room.
Advantages of the Patented KLIMASAN Drywall System
The Klimasan climate ceiling adapts flexibly to even the most intricate floor plans and is therefore able to activate every room fully. This is regardless of whether it is mounted between wooden beams, under a concrete ceiling, or on a sloping roof.
The Klimasan can be mounted directly (from a minimum installation height of approximately 30 mm) or suspended to create space for building services.
The Klimasan operates with extremely low flow temperatures and boasts excellent energy efficiency.
The Klimasan harmonises ideally with a heat pump.
The Klimasan saves money, from investment costs to monthly energy and CO2 bills.
The Klimasan has a beneficial and performance-enhancing effect on the human body.
The Klimasan can be excellently integrated into the optimisation of room acoustics.
The Klimasan is available from stock at short notice without pre-planning.
The Klimasan can be adapted on-site to short-term change requests .
The Klimasan can also be installed by DIY enthusiasts.
Klimasan - Technical Data
Activatable area: 100%
Installation height: from 30 mm
Reaction time: 15 minutes
Fire protection: up to F90
Option for acoustic optimisation using perforated ceiling or ring absorber
Heating capacity *: 75.00 W/m² according to DIN EN 14037 | Δt 15 K
Cooling capacity **: 75.00 W/m² according to DIN EN 14240 | Δt 10 K
* Higher performance (e.g., heating over 120 W/m² and cooling over 90 W/m²) is possible and depends on the design, material selection, system temperature, pipe spacing, and Δt to room temperature..
** To achieve full cooling performance while excluding condensation, moisture must be removed from the room air. For dehumidification, the ventilation system usually installed for hygienic minimum air exchange is sufficient.
Klimasan Installation Recommendateion
Download
Klimasan Specification Text
Download
Direct Installation
Installation Without Cladding
In storage or production halls, the profiles can be mounted openly on the ceiling - without the usual cladding. This reduces the installation height to two centimetres, lowers costs, and further increases performance.
Installation on Raw Ceiling
When every millimetre counts, the profile can be mounted directly on the ceiling. However, installation is usually done over counter battens or support profiles to reduce the number of drill holes.
Installation on Counter Battens
A well-proven installation method that easily compensates for any irregularities.
Suspended Installation
Creating a Ceiling Cavity
Whether deeply suspended to create the largest possible ceiling cavity or minimally suspended to compensate for irregularities in the raw ceiling. With Klimasan, you have all the options.
Perfectly Fitted
The suspended climate ceiling for WU Vienna was precisely tailored on-site to the complex ceiling geometry, achieving an occupancy density that would not be nearly possible with prefabricated cassettes.